The ANYA2418 is our professional quality WiFi 18 dBi gain directional yagi antenna. This antenna was engineered for superior semi-directional coverage in the 2.4 GHz ISM band. The frequency of this band is 2.4 to 2.485 GHz is utilized most commonly for WiFi applications. It provides VSWR of < 1.5, which is part of the professional quality of this antenna. Each antenna has been hand soldered, inspected and tested against our rigorous production quality standards.
Covered in a fiberglass radome the antenna elements are protected and adaptable for use in all weather environments. An important feature is the "L" type mounting bracket which provides 45° tilt adjustments for necessary upward and downward aiming. It is shipped with two U-bolts for mounting on up to 2" outer diameter (OD) mast or pipe. Another key feature of this antenna is that it has the versatility to provide mounting in the vertical or horizontal polarity position. The color is neutral allowing it to blend into the surrounding environment. The antenna has a short coaxial cable lead of 20 cm (7.87 inches) and is terminated with a N-female type connector.
What Gain Models Does AIR802 Manufacture?
AIR802® has engineered and manufactures 8 dBi, 10 dBi, 12 dBi, 15 dBi and 18 dBi gain yagi models.
Frequency: 2400 - 2485 MHz ,p>
Gain: 18 dBi
VSWR: < 1.5
Polarization: Vertical or Horizontal
Vertical Beam Width: 20°
Horizontal Beam Width: 25°
Front to Back Ratio: 25dB
Number of Elements: 20
Max. Input Power: 100 watts
Weight: 1.76 lbs (0.8 kg)
Length: 35.4 inches (90 cm)
Connector: N Jack (Female)
Radome Material: Light Gray Fiberglass
Mounting: U-Bolt with 45° Angle
Wind Survival: Up to 150 mph (241 km/h)
Temperature: -40° F to 176°F (-40° to 80° C)